POLI-FLEX® TURBO® is our newest polyurethane transfer film equipped with a special hotmelt for fast application at low temperature.
POLI-FLEX® TURBO® is suitable for transfer to textiles like cotton, polyester, uncoated nylon, mixtures of polyester/cotton and polyester/ acrylic. For application to Nylon that is treated with any kind of coating, please test for suitability.
POLI-FLEX® TURBO® can be used for lettering on T-shirts, sport & leisure wear, sport bags and promotional articles. POLI-FLEX® TURBO® can be cut with all current plotters. We recommend using a standard 45° knife. After weeding the cut flex film is transferred by heat press. The polyester liner should be removed warm, except for the NEON-colours the liner should be removed lukewarm.
The soft, elastic transfer film offers a comfortable textile touch and convinces due to high wearing comfort. POLI-FLEX® TURBO® excels due to an excellent opacity. POLI-FLEX® with a self-adhesive PET liner enables a reposition. The raw materials are ecologically inert, do not contain PVC, plasticizers or heavy metals (in accordance with OEKO-TEX STANDARD 100 Class I).
Guarantee for a secure and long-lasting bond of POLI-FLEX® TURBO® is only given when following the specified temperature and pressure conditions.
With the exception of the NEON-, METALLIC- and BRIGHT-colours the POLI-FLEX® TURBO® series can be pressed on top of each other. Press the final, top layer at 150 °C for 10 sec. and remove the PET liner cooler than usual.
Pressure: 2,5 - 3,0 bar [medium pressure]
Temperature / Time: 130 °C, 5 sec. / 150 °C, 4 sec. / 160 °C, 3 sec. NYLON
Pressure: 2,0 bar [low pressure] Temperature / Time: 150 °C, • Pre Heat 5 sec. • Apply to Nylon 5 sec.
Remove PET liner, cover transfer with silicon paper & apply for further 10 sec.
|Thickness of foil without backing paper||95|
|Roll width||50 cm|